A vehicle’s classified as a business vehicle if 50% of its total mileage is business-related. Business vehicles are very useful for a variety of reasons, which is why they’re so common.
If you were a business owner, you might want to have a commercial wrap done. Wrap installation is ideal for business vehicles as a form of marketing.
This immediately makes your vehicle stand out and showcases your brand. This guide will tell you everything you need to know when it comes to commercial vehicle wrap.
Keep reading to find out what goes into the process of commercial wrap.
Decide on the Kind of Wrap
When it comes to a commercial wrap, you have several options. Wrap installation usually offers full or partial wrap options.
This is the first decision you need to make when it comes to commercial vehicle wrap. Keep in mind that both options are going to provide a different effect.
Partial wraps are perfect for vehicles like trucks. They have limited external space, making this a more realistic option for your design.
On the other hand, a full wrap is the perfect option for something like a car or van. This is easier to achieve since there’s more space, allowing for a larger design.
Create the Design
The vehicle wrapping process does not only include installation. There is a lot of planning that needs to go into this for the desired results.
For your commercial wrap, you need to consider any logos or wording you want. Most people tend to stick with their business design for brand clarity.
It is a good idea to narrow your options down to a few details. Don’t overcrowd your design, as this will make it cluttered and difficult to understand.
The same rule applies when it comes to the wording you choose. The simpler the phrase, the easier it will be for passersby to understand.
The vehicle wrap installer can help you with some of this process. They should be able to provide different color options and layout advice.
Have Vehicles Repaired
Before starting the vehicle wrapping process, you need to prepare the vehicles. A wrap is something that’s installed over the surface of the vehicle.
This is carefully installed so that it lays flat, just like external paint would. Because of this, you want to make sure the outside of the vehicle is prepared.
If the vehicle has any dings or deep scratches, these need to be repaired. This also applies to any areas that may have signs of rust or peeling paint.
These are things that could damage the wrap and produce lower quality.
Clean the Vehicle
There is another step you need to take when preparing the outside of the vehicles. You need to clean all of the vehicles with mild detergent and water.
This will help to remove any debris and residue that may have been collected. These are things that will make it difficult for the wrap to adhere to the outside.
Keep in mind that you do not want to wax the vehicle or polish them after cleaning. These are things that will also make it harder for the wrap to adhere.
Make sure you wash the vehicles ahead of time so they are completely dry when you drop them off. If you notice a slight residue, you can always wipe it off with a dry towel.
Have Installation Done
One of the final steps of this process will be going to the vehicle wrap installer. When you have a car wrapping done, this is planned with an appointment.
At the appointment, the vehicle wrapping process will officially begin. It takes less time for a vehicle to be wrapped than it does for a new paint job.
Keep in mind that this will depend on how many vehicles you are having wrapped. The wrap needs to be printed before it is then installed.
When the vehicles are done, the installer will call you so you can come to pick them up. In the future, if you have the vehicles re-wrapped, this process will take even less time.
Take Care of the Wrap
After all the vehicles are wrapped, this should last for many years. But you do need to make sure you are caring for all of these commercial vehicles.
It is best to wash them frequently so they don’t develop a layer of grime. Only use mild vehicle cleaners and avoid anything that is abrasive when you scrub the vehicle.
It is also ideal if you can store the vehicles out of the sun. As durable as a commercial wrap is, it can still be damaged by the sun’s UV rays over time.
Try storing the vehicles in a garage or under an awning when they aren’t being used. Even parking them under a shady area is better than nothing.
Keep in mind that any damage to the outside of the vehicle will also damage the commercial wrap.
Commercial Wrap: What Goes Into This Process
If your business has business vehicles, you may consider commercial wrap. This is a great option if you want your vehicles to advertise your brand on the road.
You will need to create the design and have any external damage repaired. Then the installer will print the design and adhere it to the outside of the vehicle.
Are you interested in commercial wraps to showcase your brand? Contact us today at RoadRunner to get started on your vehicle wraps.
Recent Comments